01
LCD display
Switch between Chinese and English with one key. Set cutting length, speed and total quantity using the LCD display and keypad.
← Tape & webbing cutting
HESPER / CUTTING & HOLE PUNCHING
Automatic Cutting & Hole Punching Machine for Webbing, Elastic Bands and Bag Handle Cords
Automatic cut-to-length processing and hole punching · Chinese/English LCD and keypad
Main machine view: reel holder, control panel and cutting/punching assembly
Open image to enlarge ↗CUT TO LENGTH / PUNCH
Cut to length.
Process the required holes.
Automatic cut-to-length processing and hole punching for webbing, elastic bands and bag handle cords. Set length, speed and total quantity on the Chinese/English LCD and keypad. Material guides, adjustable feed-roller pressure and a material-out alarm support operation. Confirm material suitability and punching tooling with a sample and hole-position drawing.
- Maximum cutting width
- 100 mm
- Power supply
- 220 V / 50 Hz
- Power
- 900 W
Provide a material sample, finished length, hole-position drawing and target output to confirm suitability and tooling.
Or email us directly: Liangchengfeng124@gmail.com
PRODUCT VIDEO
Product video
See the processing area and a punched strip sample.
English video · Approx. 8 seconds01 / MACHINE FEATURES
Display, blade, guides and cooling.
02
High-strength steel blade
A dedicated cutting mechanism uses a thickened steel blade. Confirm cut quality and edge finish through a trial with your material.
03
Multiple guide stops
Multiple guide stops help keep the material aligned, reducing drift, off-centre cuts and uneven ends.
04
High-power cooling fan
A cooling fan helps dissipate operating heat and reduce heat buildup.
02 / SPECIFICATIONS
Machine specifications
Specifications are taken from the supplied product information. The listed 38 m/min is a speed value, not a finished-piece rate. Confirm minimum cut length, achievable tolerance and output through a sample trial.
| Functions | Automatic cut-to-length processing and hole punching |
|---|---|
| Power supply | 220 V / 50 Hz |
| Power | 900 W |
| Maximum cut-length setting | 99,999.9 mm |
| Maximum cutting width | 100 mm |
| Listed speed | 38 m/min |
| Cutter stroke | 15 mm |
| Feed-roller pressure adjustment | Yes |
| Operator interface | Chinese/English LCD and keypad |
| Adjustable settings | Length, speed and total quantity |
| Listed cutting tolerance | 0.002 × L mm (L = cut length) |
| Listed dimensions (L × W × H) | 460 × 400 × 385 mm |
| Weight | 32 kg |
03 / MATERIALS
Webbing, elastic bands, handle cords and trims.
Materials are listed in the product name and supplied information. Cutting and punching suitability depends on composition, dimensions, stretch and tooling. Confirm with a sample and hole-position drawing.
Webbing and braided tapeElastic bandsBag handle cordsNylon webbingHook-and-loop tapeZipper tapeLeather stripsRibbon and sheer ribbonHemp and cotton tapeGrosgrain tapeCare labels and printed labelsNonwoven strips
MATERIAL CHECK & ENQUIRY
Confirm the material.
Then the configuration.
Thickness range, minimum dimensions and working rate depend on the material.
Material & dimensions
Provide material composition, width or diameter, thickness, stretch and an actual sample.
Cut profile & hole pattern
Specify finished length, end profile, hole diameter, hole count, spacing, hole-position drawing and required tolerance.
Output & site conditions
Include target output, batch size, site power and compressed-air conditions to confirm the processing setup with your sample.
Selection & delivery enquiries
Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.
Liangchengfeng124@gmail.com