HESPER

Search this site

Webbing & Handle Cord Cutting and Punching Machine

Cut and punch webbing and bag handle cords

Cut webbing or bag handle cord to length and punch holes. Define the cut-end datum, hole diameter, pitch and end shape on a dimensioned drawing before trialling.

Webbing & Handle Cord Cutting and Punching Machine

Choose the process for your finished part

Holes and end profiles

Check cutting and punching methods for the chosen version. Straight, angled or other ends depend on tooling and samples.

Running several sizes

Different straps and cords may need different guide or tool setups. Compare representative largest and smallest parts.

Process

  1. Define the hole reference from the cut end and across the width on the drawing.
  2. Trial feeding, cutting and punching after selecting the setup and look for hole-position drift.
  3. Test fit the pieces with their buckles, handles or fasteners.
Hot-and-cold setup in the cutting and punching series
Hot-and-cold setup in the cutting and punching series

Machine demonstration

The existing cutting and punching demo. Confirm actual hole positions and profiles with the configuration and sample.

Open the original video

Sample checks

  • Hole position and lengthUse a common datum to measure diameter, pitch, end-to-hole distance and cut length.
  • Hole edges and fitCheck loose fibres, hanging slugs, distortion and how the fastening works.

Related guides

Back to all machine applications View this machine and specifications