HESPER

Search this site

Fabric & Nonwoven Slitting and Cross-Cutting Machine

Slit and cross-cut fabric and nonwovens

Turn fabric and nonwoven rolls into cut lengths. When the width must change too, check slitting tooling against the model and finished dimensions.

Fabric & Nonwoven Slitting and Cross-Cutting Machine

Choose the process for your finished part

Cross-cut only

For rolls already at the target width, address unwind drift, knit recovery and cross-cut squareness.

Slit and cross-cut

Provide slit positions, edge trim and each lane width. Check every lane at the actual web width.

Process

  1. Load the roll and check whether the fabric needs low-tension feeding.
  2. Set the cross-cut length and confirm each slitting setup separately on the fabric and required widths.
  3. Let the fabric relax after collection, then verify strip widths and sheet lengths.
Reference photo of nonwoven roll stock
Reference photo of nonwoven roll stock

Machine demonstration

HYD-S series roll feeding and cutting demonstration.

Open the original video

Sample checks

  • Lane by lane widthsMeasure the outside and middle lanes separately and record drift or trim variation.
  • Relaxation and cut edgesMeasure length under agreed conditions and check fraying, recovery and knit edge curl.

Related guides

Back to all machine applications View this machine and specifications