01
Welded Japanese steel blade
A welded Japanese steel blade provides a sharp, wear-resistant edge for repeated tape cutting.
← Tape & webbing cutting
HESPER / HOT CUTTING & COLLECTION
CXY-140RS Hot Cutter with Pick-and-Place Collection
CXY-140RS · Hot cut-to-length processing · Automatic pick-and-place collection
Main machine view: material reel, hot cutting assembly and automatic collection table
Open image to enlarge ↗CXY-140RS / CUT & COLLECT
Hot cutting.
Automatic collection.
Combines hot cut-to-length processing with automatic pick-and-place collection for rope, webbing, ribbon, hook-and-loop tape, nonwoven fabric and zipper tape. Set the cut length and batch quantity, then collect the cut pieces on the receiving table.
- Model
- CXY-140RS
- Cutting width
- 1–140 mm
- Power supply
- 220 V / 50/60 Hz
- Total power
- 1.2 kW
Provide a material sample, finished length, strip count and collection requirements to confirm hot cutting suitability and the collection setup.
Or email us directly: Liangchengfeng124@gmail.com
01 / MACHINE FEATURES
Cutting blade, display, cooling and guides.
02
LCD display
The Chinese-language LCD display lets you view and adjust speed, temperature and cutting length.
03
Fan cooling
A cooling fan dissipates heat generated during operation and helps reduce heat buildup.
04
Adjustable guides and multiple-strip cutting
Multiple guide stops help prevent material drift and off-centre cuts. Several strips can be cut together, subject to their widths and guide setup.
02 / SPECIFICATIONS
CXY-140RS specifications
Feed speed and cutting rate are separate specifications. Actual output depends on the material, cut length and collection setup.
| Model | CXY-140RS |
|---|---|
| Process | Hot cutting with automatic pick-and-place collection |
| Power supply | 220 V / 50/60 Hz |
| Total power | 1.2 kW |
| Heating power | 0.8 kW |
| Temperature setting range | 0–550 °C |
| Cutting width | 1–140 mm |
| Pulling length | Up to 2000 mm |
| Feed speed | 700 mm/s |
| Cutting rate | Approx. 30 cuts/min |
| Operator interface | LCD touchscreen; supplied information shows a Chinese-language interface |
| Adjustable settings | Cut length, batch quantity, speed and temperature |
| Machine weight | 60 kg |
| Packing type | Wooden-frame packing |
03 / MATERIALS
Webbing, cords and trim materials.
Hot cutting suitability depends on material composition, dimensions and edge-finish requirements. Confirm with an actual sample.
Webbing
Webbing for cut-to-length processing and automatic collection.
Braided sleeving
Braided sleeving; confirm hot cutting suitability for its material and construction.
Lanyard straps
Strap material for lanyards, cut to length and collected.
Hook-and-loop tape
Confirm suitability for the tape thickness, width and required edge finish.
Zipper tape
Provide an actual zipper-tape sample to confirm the cut position and edge finish.
Shoelaces
Shoelace materials; confirm hot cutting suitability for their composition, width or diameter.
Nylon webbing
Nylon webbing; confirm suitability for its width, thickness and edge-finish requirements.
Round cord
Round cord; confirm diameter, stretch and finished-length requirements.
Garment straps
Strap material for garments, cut to length and collected.
MATERIAL CHECK & ENQUIRY
Confirm the material.
Then the configuration.
Thickness range, minimum dimensions and working rate depend on the material.
Material & dimensions
Provide material composition, width or diameter, thickness, stretch and an actual sample.
Hot cutting & collection
Specify minimum and typical finished lengths, tolerance, edge finish, strip count and stacking requirements.
Output & cutting trial
Provide batch size and target output to confirm hot cutting suitability and test the collection setup with your sample.
Selection & delivery enquiries
Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.
Liangchengfeng124@gmail.com