HESPER

Search this site

← Tape cutting

HESPER / ULTRASONIC RIBBON CUTTING

Automatic Ribbon Ultrasonic Cutting Machine for V-Cuts and Angled Cuts

PLC touchscreen · Photoelectric registration · Ultrasonic cutting

RIBBON / V-CUTS / ANGLED CUTS

Feed to length.
Cut the required profile.

Automatic ultrasonic cut-to-length processing for ribbon, webbing and tape, with V-cuts and angled cuts. PLC touchscreen controls set feed length and speed, while photoelectric registration supports marked materials. Cut profiles require matching tooling; confirm edge sealing and material suitability with a sample.

Controls
PLC touchscreen
Cutting action
Ultrasonic
Power supply
220 V / 50 Hz

Share a material sample, width, cut length and cut-profile drawing to confirm the configuration.

Or email us directly:

PRODUCT VIDEO

Ultrasonic ribbon cutting demonstration

Watch the English demonstration video for this machine. Confirm the required configuration with a material sample and cut-profile drawing.

English video · Approx. 10 sec

01 / MACHINE FEATURES

Automatic feeding and ultrasonic profile cutting.

PLC touchscreen controls
01

PLC touchscreen controls

Set feed length, speed and quantity through the touchscreen, with automatic feeding and counting. The pictured settings are an interface example.

Air pressure regulation and filtration
02

Air pressure regulation and filtration

A pressure gauge and air regulation and filtration components support the pneumatic system. Confirm the required pressure and site air supply before installation.

Automatic feeding and guidance
03

Automatic feeding and guidance

Feed rollers and adjustable guides advance tape along the set material path. Confirm feeding stability and finished-part tolerance with a sample.

Rotary ultrasonic cutting head
04

Rotary ultrasonic cutting head

The ultrasonic cutting head works with the feed controls. V-cuts and angled cuts require matching tooling; cut finish depends on material and settings.

02 / CONFIGURATION

Machine configuration

Confirm the listed output for the material, cut length, tooling and operating settings. Custom profiles require drawing review and a sample cutting trial.

Ultrasonic ribbon cutter configuration
Effective width100 mm
ControlsPLC touchscreen
RegistrationPhotoelectric registration
Feed settingsAdjustable length and speed
Supplier-listed output150–200 pieces/min, depending on material, length and cut profile
Power supply220 V / 50 Hz
Machine dimensions1000 × 600 × 1350 mm
Machine weight120 kg
Air supplyExternal compressed-air supply required

03 / MATERIALS

For ribbon, webbing and tape.

The images show material examples from the supplied information. Confirm suitability and ultrasonic cutting and edge-sealing results for the material composition and thickness through a sample trial.

Zipper Tape
Zipper Tape
Hook-and-Loop Tape
Hook-and-Loop Tape
Leather Strips
Leather Strips
Ribbon
Ribbon
Nylon Webbing
Nylon Webbing
Elastic Tape
Elastic Tape
Braided Sleeving
Braided Sleeving
Webbing
Webbing

Prepare an enquiry for this machine.

Include a material sample, width, cut length, cut-profile drawing and target output.

Prepare an enquiry ↗

BLADE & TOOLING OPTIONS

Select blades to suit your required cut shape.

These diagrams illustrate cut profiles. Blade or tooling selection depends on the material, thickness, dimensions and machine model. Confirm shaped cuts and punching configurations with a sample.

Straight cut
Straight cut
Parallel angle cut
Parallel angle cut
Trapezoid cut
Trapezoid cut
Single angle cut
Single angle cut
Single V notch
Single V notch
Double V notch
Double V notch
Double pointed ends
Double pointed ends
Single pointed end
Single pointed end
V notch and point
V notch and point
Cutting and punching
Cutting and punching
Rounded ends
Rounded ends
Serrated ends
Serrated ends

MATERIAL CHECK & ENQUIRY

Confirm the material.
Then the configuration.

Thickness range, minimum dimensions and working rate depend on the material.

01

Material & roll specification

Provide material composition, width, thickness, stretch, roll diameter and an actual sample.

02

Length & cut-profile drawing

Include cut length, required tolerance, angled-cut geometry, V-notch dimensions and a finished-part drawing.

03

Output & cutting trial

Specify target output and site power and air conditions. Confirm tooling, edge sealing and configuration through a sample trial.

Selection & delivery enquiries

Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.

Send material requirements ↗

PROCESSING & SELECTION

Explore material and processing requirements

Back to material selection ↗

Ask about this machine

Share material photos, thickness, width and cut length. We can help you choose a machine; unknown details can be added later.

Your contact details & requirements

Only the three fields marked * are required.

Share material photos, thickness, width and cut length to help us recommend a machine. Unknown details can be added later.

HESPER stores your contact details and requirements to reply to this enquiry.

Add material photos (optional)
Material photos (optional)

Up to 3 photos. Take a photo or choose from your library; photos are optional. Images are resized to JPG, up to 5 MB each.

    Add technical details (optional)
    Get a Quote / Add Photos ↗