TAPE CUTTERS · CHOOSING A WIDTH

Cutting width is the first number most buyers look at, and the easiest one to get wrong. Too narrow and your widest strap won't fit. Wider than you need, and you get a bigger, heavier machine that is not any faster. Here is how to choose.

Guide · 6 min read

4 options95 mm Economy, 95 mm High-Speed, 210 mm and 310 mm Touchscreen
Widest stripChoose the width from the widest material you cut, not the one you cut most
140/minThe highest reference output is on a 95 mm machine, at a 50 mm cut length
110 V / 220 VBoth voltages are offered on all four options

A workshop cuts 25 mm webbing for bag straps every day. Twice a month it also cuts 150 mm hook-and-loop panels, and those are still cut by hand. When it comes to buying a tape cutter, the question is simple: a 95 mm machine for the daily work, or a wider one that covers both jobs?

HESPER's hot and cold tape cutters come in four options with three cutting widths. The width is only one part of the choice. Output, controls, the materials listed for each machine and bench space all change between them.

THE SHORT ANSWER

Measure the widest strip you need to cut, now and in the next year or two, and choose the narrowest option that covers it: 1–95 mm, 1–210 mm or 1–310 mm. If you plan to feed several strips side by side, check their total width and confirm parallel feeding with a sample. Don't choose a wider machine for speed: the 95 mm High-Speed lists the highest reference output, 140 pieces/min at a 50 mm cut length, against 110 for both touchscreen options. Then compare controls, listed materials, power and weight.

  1. 01 Start with your widest strip
  2. 02 Several strips side by side
  3. 03 Wider is not faster
  4. 04 Controls and job settings
  5. 05 Materials listed per option
  6. 06 Bench space and power
  7. → Which option fits
  8. ? FAQ

01 · START WITH YOUR WIDEST STRIP

The width that decides is the widest one

Each option cuts any width from 1 mm up to its maximum. So the question is not which width you cut most, but which is the widest one you need to cut at all.

  • List every material. Webbing, ribbon, hook-and-loop, elastic, zipper tape: write down the width of each.
  • Mark the widest. That number sets the minimum cutting width.
  • Think ahead. If a wider product is coming, include it now rather than buying a second machine later.
  • Note thickness too. Width is not the only limit. Send a sample of thick or stiff material.
Chart comparing the 95, 210 and 310 mm cutting widths with example strips of 25, 50 and 150 mm
Choose the width from the widest strip you cut. Strip widths are an example. Illustration by HESPER. View hot and cold tape cutters

02 · SEVERAL STRIPS SIDE BY SIDE

Total width counts when you cut in parallel

The tape cutter page shows several webbing strips passing side by side through the cutter, and a video of parallel feeding and cutting. The page does not say which options support it, so confirm with your material.

  • Add the widths. Several strips fed together need their combined width, plus the space between them, to fit the cutting width.
  • Same material, same length. Strips cut together all come out at the same length.
  • Send samples. Ask for a trial with the number of strips you plan to run. See cutting several webbing straps at once.
Diagram of three strips fed side by side, showing combined width and cutting width
When strips run side by side, their combined width plus the gaps must fit the cutting width. Illustration by HESPER. View hot and cold tape cutters

03 · WIDER IS NOT FASTER

Compare the reference output

All output figures on the product page use a 50 mm cut length. Actual output varies with material, cut length and settings.

OptionCutting widthReference output at 50 mm
95mm Economy1–95 mm100 pieces/min
95mm High-Speed1–95 mm140 pieces/min
210mm Touchscreen1–210 mm110 pieces/min
310mm Touchscreen1–310 mm110 pieces/min
Bar chart of reference output at a 50 mm cut length: 100, 140, 110 and 110 pieces per minute
Reference output from the tape cutter page, all at a 50 mm cut length. Illustration by HESPER. View hot and cold tape cutters

If all your material is 95 mm wide or narrower and output matters most, the 95 mm High-Speed is the one to look at first.

04 · CONTROLS AND JOB SETTINGS

Buttons, LCD or touchscreen

  • 95mm Economy. Button control panel, for routine cut-to-length work.
  • 95mm High-Speed. LCD and buttons.
  • 210mm and 310mm. Touchscreen.
  • Job settings. The 95 mm High-Speed and both touchscreen options let you set cut length, speed and quantity, and stop when the job is complete. They also list stepper-driven feeding.

05 · MATERIALS LISTED PER OPTION

Check your material against the brochure

  • Hook-and-loop tape. Listed for all four options.
  • Elastic tape. Listed for the 95 mm Economy.
  • Plastic hose. Listed for the 95 mm High-Speed, 210 mm and 310 mm.
  • Webbing, ribbon, zipper tape and shoelace strips. Described as applications of the range, not tied to one option. Send a sample.

All four options have hot and cold knife cutting. If you are not sure which cut your material needs, see hot and cold or hot-only.

06 · BENCH SPACE AND POWER

What changes as the machine gets wider

OptionPowerWeight as listed
95mm Economy0.44 kW24 / 25 kg
95mm High-Speed0.45 kW25 kg
210mm Touchscreen0.57 kW30.5 kg
310mm Touchscreen0.67 kW37 kg

All four are offered in 110 V and 220 V. Tell HESPER which one your workshop uses when you ask for a quote.

WHICH OPTION FITS

A quick way to narrow it down

Your widest stripWhat matters mostLook at
Up to 95 mmRoutine cutting, simple button controls95mm Economy
Up to 95 mmHighest reference output, job settings95mm High-Speed
Over 95 mm, up to 210 mmWider tapes and webbing210mm Touchscreen
Over 210 mm, up to 310 mmThe widest strips310mm Touchscreen

Full specifications are on the tape cutter page.

? FAQ

Tape cutter width questions

What cutting widths are available?

1–95 mm on both 95 mm options, 1–210 mm and 1–310 mm on the touchscreen options.

Can a wide machine cut narrow tape?

Yes. Each option cuts any width from 1 mm up to its maximum.

Is a wider machine faster?

No. The 95 mm High-Speed lists 140 pieces/min at a 50 mm cut length. Both touchscreen options list 110.

How do I choose if I cut several widths?

Choose by the widest strip you need to cut, including products you expect to add.

Can I cut several strips at once?

The product page shows parallel feeding, but doesn't say which options support it. Check the combined width and confirm with a sample.

What is the cut length range?

1–99,999 mm on all four options.

What should I send for a quote?

Material and composition, width and thickness, cut length, target output, batch quantity, cut-end requirements and your power supply. A sample helps most.

CHOOSING A WIDTH

Not Sure Which Width You Need?

Send HESPER the widths of everything you cut, the widest strip you expect in future, your cut lengths and daily quantity. Samples of the widest and thickest material are the quickest way to confirm the right option.

Send your tape details · See the tape cutters · sales@hespermachine.com

← Back to the blog