Red and black satin ribbon bows on gift boxes with loose ribbon tails
Red and black bows on gift boxes, with visible V-notched ribbon ends. Decorative application illustration, not a HESPER machine-cut sample. Photo: Tamanna Rumee on Unsplash.

“Can your machine cut a V-notch?” “We need rounded ends on a bag strap.” “Our customer wants pointed ends on a lanyard.” Buyers looking for a ribbon cutting machine or a strap cutter often ask about end shapes like these.

The answer depends on three things: the end shape you need, the material, and its thickness. This guide explains the common shapes in plain words, how material and thickness change the result, and which HESPER machines to look at.

The Common End Shapes and Where They Are Used

HESPER product pages illustrate twelve reference cut profiles and processing combinations. The table groups single- and double-ended V-notches and points into two rows, with application examples to help describe your requirements. Use a finished-part drawing to define the exact shape.

End shapeWhat it looks likeApplication examples
Straight cutSquare across the widthStraps and tapes that will be sewn, folded or bound
Parallel angle cutBoth ends cut at the same anglePieces that overlap neatly when sewn or joined
Single angle cutOne end angledStrap ends that need to slide through a buckle or loop
Trapezoid cutEnds angled in opposite directionsPieces that need a trapezoid outline
Single V-notch (one end) / double V-notch (both ends)An inward V at one or both ends, leaving two points at each notchRibbon ends on bows, rosettes and decorations (also called dovetail ribbon ends)
Single pointed end (one end) / double pointed ends (both ends)An outward point at one or both endsEnds that thread through buckles and keepers
V-notch and pointA notch on one end, a point on the otherPieces with a different finish at each end
Rounded endsCurved cornersStraps and tags handled often, where sharp corners are unwanted
Serrated endsA zigzag edgeDecorative ribbon and trim
Cutting and punchingCut to length plus holesAdjustable straps, bag handles and pieces that take a rivet or fastener

These profiles are reference shapes, not a promise that every shape works on every material or machine. Select blades, dies or other matching tooling for the material, thickness, dimensions and machine model, then confirm with a sample.

Camouflage backpack with black straps
Camouflage backpack with black straps. Application illustration, not evidence of an end profile or machine-cut result. Photo: gladys rovetta on Unsplash.

Material Changes How the End Looks

The same shape can look very different on different materials. Before you choose a shape, check what your strap or ribbon is made of:

  • Polyester and nylon are thermoplastic. A hot knife cutter or an ultrasonic cutting machine can cut and seal suitable materials when the process is matched to the job. Blends, coatings, thickness, tooling and settings affect the result; check samples for fraying, discoloration and an excessively hard edge.
  • Pure cotton, pure linen and natural leather cannot seal through their own melting in the same way as thermoplastic fibres. Start by evaluating cold cutting and any finishing needed afterward. Assess blends, coated materials and artificial leather by their actual composition, not appearance alone.
  • Elastic and stretchy tapes can change shape after they relax, so check the finished outline after cutting, not just on the machine.

Still deciding how to cut ribbon ends on synthetic material? Our comparison of rotary knife and hot knife cutting explains how the cutting method affects the edge.

Green backpack with brown straps and buckles on a yellow chair
Brown straps, holes and buckles show how strap ends relate to assembly. Application illustration; material composition requires separate confirmation. Photo: YF Chen (@sangeren) on Unsplash.

Thickness Changes What the Blade Must Do

Do not assume that a thin satin ribbon and thick nylon webbing can use the same tooling and settings, even for the same end shape. Thickness, density and layer structure affect the cutting load and profile detail. Small V-notches and serrations particularly need sample confirmation.

Provide a drawing and material sample before confirming a shaped cut. The ultrasonic V-cut machine page requires drawing review and a sample cutting trial for custom profiles. Custom blades or matching tooling can be assessed for your end shape; confirm whether separate tools are needed and whether the selected machine can process each requirement.

Which HESPER Machine Fits Which Job?

Your jobMachine to look atWhat the product page says
V-notch and angled ribbon ends; confirm registration on printed ribbon with suitable marksUltrasonic V-cut and angled-cut machineUltrasonic cutting; 100 mm effective width; photoelectric registration for marked materials; cut profiles require matching tooling; needs compressed air
Webbing, ribbon and elastic with hot or cold cuttingCXY-160W hot and cold cutting machineHot-cutting width 1–160 mm; confirm tooling for angled cuts and shaped profiles
Ultrasonic cut-to-length for ribbon and webbingCXY-100CW ultrasonic cutterUltrasonic cut-to-length processing; confirm shaped-cut tooling for the material and machine
Straps that need angled ends or V-notches plus holesCXY-80T ultrasonic cutting and punching machineAngle cuts and V-notches as options; hole count and spacing set on the touchscreen
Bag handles and straps that need holesAutomatic cutting and hole punching machineMaximum cutting width 100 mm; confirm punching tooling with a sample and hole-position drawing

Use this table as a starting point. The right machine and blade set are confirmed after a sample trial with your material.

Pink gift box tied with a white and dark red ribbon bow, scissors beside it
White and dark red ribbons on a gift box, with scissors alongside. Decorative application illustration, not a HESPER machine-cut sample. Photo: eskay lim on Unsplash.

Confirm the Shape With a Sample Trial

Before ordering a ribbon cutter or webbing cutter for shaped ends, send:

  1. A material sample, with its composition (for example, polyester satin or nylon webbing)
  2. Width and thickness
  3. Finished length and allowed tolerance
  4. A drawing or clear photo of the end shape on each end
  5. Hole diameter, positions and spacing, if punching is needed
  6. Whether the edge must be sealed, and how soft it needs to feel
  7. Your daily quantity

Ask to review the cut samples and a short processing video. Check the ends after handling, sewing or threading through a buckle, not only straight off the machine.

FAQ

Can one ribbon cutting machine make every end shape?

The name alone does not establish that capability. Match the required profile to the tooling, material and machine. Custom blades or tooling can be assessed from a drawing and confirmed by trials. Changing tooling does not make every machine capable of every shape.

Which cutting method seals strap and ribbon ends?

Hot knife and ultrasonic cutting can cut and seal suitable thermoplastic materials such as polyester and nylon; verify the result with your actual material. Do not apply the same sealing assumption to pure cotton, pure linen or natural leather. Assess blends, coatings and artificial leather separately.

Is a V-notch the same as a dovetail ribbon end?

Yes. A V-notch cuts an inward V into the end, leaving two points. Crafters often call it a dovetail or fishtail end.

What should I send to get the right end shape?

Send a sample and material composition, width and thickness, finished length and tolerance, a drawing or photo of both ends, hole diameter and positions if needed, edge-sealing requirements and daily quantity.

Have an end shape in mind? Send HESPER your sample and a sketch of the ends you need. We will discuss the cutting method, tooling and machine based on your material and drawing, and confirm sample-trial arrangements. Send your requirements or email sales@hespermachine.com.

← Back to the blogPrepare your requirements ↗