HESPER

Search this site

← Roll-to-sheet cutting

HESPER / FILM & PACKAGING MATERIAL CUTTING

Film, Paper and Fabric Cutting Machine with Spring-Loaded Pre-Feeder and Conveyor

Spring-loaded pre-feeder · Cut-to-length · Conveyor discharge

ROLL FEEDING / CUT-TO-LENGTH

Set the length.
Feed and cut automatically.

Combines a spring-loaded pre-feeder, cut-to-length cross-cutting and conveyor discharge for film, paper and fabric rolls. Chinese/English LCD and keypad controls provide settings for length, speed, total quantity, batch quantity and pause time. The machine includes photoelectric sensing, pressure-adjustable feed rollers and a separate roll stand.

Feeding accuracy
0.01 mm
Cut length
Adjustable
Interface languages
Chinese / English

Share the material, thickness, feed width and finished length to confirm suitability.

Or email us directly:

PRODUCT VIDEO

Product video

Watch foil feeding, cutting and conveyor discharge in action.

English narration · Approx. 30 sec

01 / MACHINE FEATURES

Guide, feed and cut to length.

Spring-loaded pre-feeder and conveyor

Pre-feeding, cutting and conveyor discharge are combined in one machine arrangement.

Chinese / English LCD controls

Use the keypad to set length, speed, total quantity, batch quantity and pause time.

Panasonic photoelectric sensing

A photoelectric sensor supports material detection and registration control.

Pressure-adjustable feed rollers

Polyurethane feed rollers have pressure-adjustment screws at both ends to suit the material.

Separate bearing-supported roll stand

A floor-standing frame with bearing-supported cones carries the material roll.

Speed adjustment and cooling

A speed-control knob works with an AC variable-speed motor and photoelectric pre-feeding control. Cooling fans help dissipate heat.

MODEL OPTIONS

Four model specifications

Dimensions are listed as length × width × height in cm, as supplied. Confirm installation layout and actual footprint for the selected configuration.

Models, working widths and listed dimensions
ModelWorking widthL × W × H (listed)
CXY-300T300 mm200 × 30 × 150 cm
CXY-400T400 mm200 × 40 × 150 cm
CXY-500T500 mm200 × 50 × 150 cm
CXY-600T600 mm200 × 60 × 150 cm

02 / CONFIGURATION

Machine configuration

Configuration is listed from the supplied data. The 700 mm/s figure is feed speed, not finished-part output. Feeding accuracy and finished-part cutting tolerance are separate specifications.

Film and packaging-material cutter configuration
Operator interfaceChinese / English LCD and keypad
Programmable settingsLength, speed, total quantity, batch quantity and pause time
Feeding accuracy0.01 mm
Feed speed (listed)700 mm/s
Power (listed)1.2 kW
Cutting motorClosed-loop motor
Blade materialSKD11
Roller pressureAdjustable
Feed rollersPolyurethane
DischargeConveyor

03 / MATERIALS

For films, foam, fabrics and paper.

Confirm suitability for the actual material thickness, feed width, finished length and required edge finish.

FilmPaperFabricNonwovensSelf-adhesive label stockProtective filmPET filmPVC filmEVA foamCopper foilAluminium foil

Prepare an enquiry for this machine.

Include a material sample, cut dimensions and target output.

Prepare an enquiry ↗

BLADE & TOOLING OPTIONS

Select blades to suit your required cut shape.

These diagrams illustrate cut profiles. Blade or tooling selection depends on the material, thickness, dimensions and machine model. Confirm shaped cuts and punching configurations with a sample.

Straight cut
Straight cut
Parallel angle cut
Parallel angle cut
Trapezoid cut
Trapezoid cut
Single angle cut
Single angle cut
Single V notch
Single V notch
Double V notch
Double V notch
Double pointed ends
Double pointed ends
Single pointed end
Single pointed end
V notch and point
V notch and point
Cutting and punching
Cutting and punching
Rounded ends
Rounded ends
Serrated ends
Serrated ends

MATERIAL CHECK & ENQUIRY

Confirm the material.
Then the configuration.

Thickness range, minimum dimensions and working rate depend on the material.

01

Roll specification

Include material, thickness, stretch, web width, roll diameter and roll weight.

02

Cut-to-length requirements

Specify feed width, minimum and typical cut lengths, and required tolerance.

03

Output & sample

Provide material photos, finished-part requirements and target output to confirm suitability and discuss a cutting trial.

Selection & delivery enquiries

Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.

Send material requirements ↗

PROCESSING & SELECTION

Explore material and processing requirements

Back to material selection ↗

Ask about this machine

Share material photos, thickness, width and cut length. We can help you choose a machine; unknown details can be added later.

Your contact details & requirements

Only the three fields marked * are required.

Share material photos, thickness, width and cut length to help us recommend a machine. Unknown details can be added later.

HESPER stores your contact details and requirements to reply to this enquiry.

Add material photos (optional)
Material photos (optional)

Up to 3 photos. Take a photo or choose from your library; photos are optional. Images are resized to JPG, up to 5 MB each.

    Add technical details (optional)
    Get a Quote / Add Photos ↗