HESPER

Search this site

← Roll-to-sheet cutting

HESPER / PERFORATING & REWINDING

Easy-Tear Perforating and Rewinding Machine

Easy-tear perforations · Roll-to-roll rewinding · Bilingual operation

ROLL → PERFORATE → REWIND

Perforate the web.
Rewind for tear-off dispensing.

Creates easy-tear perforations, then rewinds the material into finished rolls for convenient tear-off dispensing. The machine combines unwinding, feeding, perforating tooling and rewinding, with PLC control, a Chinese/English display, a tension and straightening unit, and pressure-adjustable feed rollers.

Controls
PLC
Blade width
410 mm
Interface languages
Chinese / English

Share material, thickness, web width, perforation spacing and finished-roll requirements to confirm configuration.

Or email us directly:

PRODUCT VIDEO

Product video

Watch the English demonstration of perforating and rewinding.

English video · 1080p · Approx. 57 sec

01 / MACHINE FEATURES

Rewinding, controls and material handling.

Rewinding after processing
01

Rewinding after processing

After perforating, the material is rewound into finished rolls for convenient dispensing.

PLC and bilingual operation
02

PLC and bilingual operation

PLC control and a Chinese/English LCD interface bring machine operation to the control panel.

Air pressure regulation
03

Air pressure regulation

A regulator with a knob and pressure gauge adjusts incoming air pressure to control cylinder clamping force and processing force.

Motor and drive
04

Motor and drive

The motor and drive support programmed material feeding. Confirm perforation spacing and allowable variation using the actual material, feed settings and trial samples.

Material guidance and roller pressure
05

Material guidance and roller pressure

A tension and straightening unit guides the material path. Adjustment screws set feed-roller pressure.

Separate bearing-supported roll stand
06

Separate bearing-supported roll stand

A floor-standing roll stand supports the supply roll and includes positioning clamps.

02 / CONFIGURATION

Machine configuration

The supplied data lists a 410 mm blade width. Confirm usable web width, perforation spacing, cut-and-tie pattern and rewind specifications against your material sample and finished-roll requirements.

Control or feeding specifications are not finished perforation-spacing tolerances. Provide the target spacing and allowable variation, then confirm the measurement method and acceptance criteria through trials using the actual material, processing speed and rewind tension.

Perforating and rewinding machine configuration
Voltage110–220 V
Finished perforation spacing & toleranceConfirm against material trials and acceptance requirements
Rotational speedAdjustable
Power1800 W
Machine weight290 kg
ProcessEasy-tear perforating followed by rewinding
ControlsPLC
Display and languagesLCD display, Chinese / English
Blade width (listed)410 mm
Blade materialSKD-11
DriveElectric + pneumatic
Feed-roller pressureAdjustable
Air pressure regulationKnob and pressure gauge
Material guidanceTension and straightening unit
Roll supportBearing-supported floor-standing roll stand

03 / MATERIALS

Match the perforation to the material.

The images show nine material categories from the supplied references. Confirm perforating and rewinding suitability for the actual thickness, construction and sample. Thin metals are for high-specification models only; confirm the required configuration separately.

Paper rollsFabric and nonwoven rollsFilm rolls

Prepare an enquiry for this machine.

Include a material sample, perforation pattern, rewind requirements and target output.

Prepare an enquiry ↗

BLADE & TOOLING OPTIONS

Select blades to suit your required cut shape.

These diagrams illustrate cut profiles. Blade or tooling selection depends on the material, thickness, dimensions and machine model. Confirm shaped cuts and punching configurations with a sample.

Straight cut
Straight cut
Parallel angle cut
Parallel angle cut
Trapezoid cut
Trapezoid cut
Single angle cut
Single angle cut
Single V notch
Single V notch
Double V notch
Double V notch
Double pointed ends
Double pointed ends
Single pointed end
Single pointed end
V notch and point
V notch and point
Cutting and punching
Cutting and punching
Rounded ends
Rounded ends
Serrated ends
Serrated ends

SAMPLE TRIAL & SELECTION

Confirm the perforation and the finished roll.

Provide material composition, thickness, web width, perforation spacing, cut-and-tie pattern, core size, finished-roll diameter and target output. Use sample trials to confirm tear-off performance and rewinding results.

Enquire about this machine ↗

Ask about this machine

Share material photos, thickness, width and cut length. We can help you choose a machine; unknown details can be added later.

Your contact details & requirements

Only the three fields marked * are required.

Share material photos, thickness, width and cut length to help us recommend a machine. Unknown details can be added later.

HESPER stores your contact details and requirements to reply to this enquiry.

Add material photos (optional)
Material photos (optional)

Up to 3 photos. Take a photo or choose from your library; photos are optional. Images are resized to JPG, up to 5 MB each.

    Add technical details (optional)
    Get a Quote / Add Photos ↗