HESPER

Search this site

← Roll-to-sheet cutting

HESPER / FILM & PACKAGING MATERIAL CUTTING

Automatic PVC and PE Film Heat Sealing and Cutting Machine

PVC and PE film · Roll feeding · Digital controls

ROLL FEEDING / CUT-TO-LENGTH

Set the length.
Feed and cut automatically.

Roll-fed equipment for PVC and PE film processing requirements. Digital keypad controls provide settings for cut length, feed speed and production quantity. A separate roll stand, adjustable material guides and feed-roller pressure adjustment support material handling. Confirm the heat-sealing configuration against your material sample and finished-part requirements.

Listed model
HYD-600
Cut length
Adjustable
Feed roller
Adjustable pressure

Share the material, thickness, feed width and finished length to confirm suitability.

Or email us directly:

PRODUCT VIDEO

Product video

Watch the English demonstration video for this machine.

English video · 4K · Approx. 11 sec

01 / MACHINE FEATURES

Guide, feed and cut to length.

Digital keypad controls

Set cut length and feed speed for different cut-to-length jobs.

Production counting

Batch, cumulative and total quantity functions help organize repeat production jobs.

Adjustable guides and roller pressure

Adjust guide positions and roller pressure to guide roll material into the cutting area.

Separate roll stand

A bearing-supported roll stand carries the material roll separately from the main unit.

02 / CONFIGURATION

HYD-600 specifications & configuration

These specifications apply to the HYD-600 model in the supplied data. Length and width ranges and speed are listed as supplied; confirm minimum dimensions, finished-part tolerance and actual output through material trials. The 250 W figure is cutting motor power, not total machine power. Confirm the heat-sealing configuration separately.

HYD-600 model specifications
ModelHYD-600
Blade materialSKD-11
Panel materialStainless steel
Roller materialPolyurethane
Display128 × 64 LCD
Cutting motor power250 W
Feed motorStepper motor
Weight (listed)85 kg
Dimensions (listed)600 × 860 × 390 mm
Cut length range (listed)0.1–9999.9 mm
Cut width range (listed)0.1–600 mm
Power supply220 V / 50 Hz
Cutting speed (listed)34 m/min
ControlsMicrocomputer control with display screen and keypad
Cut lengthAdjustable
Feed speedAdjustable
Counting functionsBatch, cumulative and total quantity
Material guidesAdjustable positions
Feed rollerAdjustable pressure
Roll supportSeparate roll stand with bearings

03 / MATERIALS

Cutting for film, paper, nonwovens and foam.

The supplied HYD-600 data lists paper, film, bubble wrap, nonwoven fabric and foam as cutting materials. Confirm heat-sealing suitability separately against material composition, thickness and seal requirements.

PVC filmPE filmPaperBubble wrapNonwoven fabricFoam

Prepare an enquiry for this machine.

Include a material sample, cut dimensions and target output.

Prepare an enquiry ↗

BLADE & TOOLING OPTIONS

Select blades to suit your required cut shape.

These diagrams illustrate cut profiles. Blade or tooling selection depends on the material, thickness, dimensions and machine model. Confirm shaped cuts and punching configurations with a sample.

Straight cut
Straight cut
Parallel angle cut
Parallel angle cut
Trapezoid cut
Trapezoid cut
Single angle cut
Single angle cut
Single V notch
Single V notch
Double V notch
Double V notch
Double pointed ends
Double pointed ends
Single pointed end
Single pointed end
V notch and point
V notch and point
Cutting and punching
Cutting and punching
Rounded ends
Rounded ends
Serrated ends
Serrated ends

MATERIAL CHECK & ENQUIRY

Confirm the material.
Then the configuration.

Thickness range, minimum dimensions and working rate depend on the material.

01

Roll specification

Include material, thickness, stretch, web width, roll diameter and roll weight.

02

Cut-to-length requirements

Specify feed width, minimum and typical cut lengths, and required tolerance.

03

Output & sample

Provide material photos, finished-part requirements and target output to confirm suitability and discuss a cutting trial.

Selection & delivery enquiries

Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.

Send material requirements ↗

Ask about this machine

Share material photos, thickness, width and cut length. We can help you choose a machine; unknown details can be added later.

Your contact details & requirements

Only the three fields marked * are required.

Share material photos, thickness, width and cut length to help us recommend a machine. Unknown details can be added later.

HESPER stores your contact details and requirements to reply to this enquiry.

Add material photos (optional)
Material photos (optional)

Up to 3 photos. Take a photo or choose from your library; photos are optional. Images are resized to JPG, up to 5 MB each.

    Add technical details (optional)
    Get a Quote / Add Photos ↗