This tabletop POF film cutting machine feeds polyolefin shrink film from a roll and cross-cuts it into individual sheets at a preset length. Adjustable cutting length, feed-speed settings and quantity controls support repeat cutting jobs.
The LCD control panel switches between Chinese and English. Optional longitudinal blades combine POF film slitting with cut-to-length cross-cutting. Provide your film specifications and finished-sheet requirements to confirm the feeding setup, blade configuration and suitability for your application.
Interface languages
Switchable Chinese / English
Longitudinal slitting
Optional
Send your POF film thickness, roll width, required sheet dimensions and target output to confirm the configuration.
Prepare individual sheets from continuous POF film rolls for your next production step. The feeding system advances the film, and the cutting mechanism cuts across its width at the programmed length.
For a polyolefin shrink film roll-to-sheet cutting application, specify the film grade, thickness, roll dimensions and required sheet length. These details help determine the feeding setup and assess whether the configuration meets your production requirements.
02 / PROCESS
Adjustable POF Shrink Film Cut-to-Length Processing
Operators can set the cutting length, feed-speed level and total quantity through the switchable Chinese/English LCD control panel. Cutting delay, cutting interval, batch pause and length compensation provide additional adjustments for repeat production tasks.
When selecting a POF film cut-to-length machine, consider both the required sheet dimensions and how the film behaves during feeding. The practical cutting range and achievable tolerance should be confirmed using the actual film.
03 / PROCESS
Optional POF Shrink Film Slitting and Cross-Cutting
Optional longitudinal blades allow the machine to combine POF film slitting and cross-cutting. The longitudinal blades divide the film into narrower widths, while the cross-cutting mechanism cuts it to the set length.
Provide the incoming roll width, required strip widths, number of strips and finished lengths when requesting this option. Blade quantity, blade spacing and film suitability must be confirmed before ordering.
This configuration prepares cut pieces from a film roll. Rewinding slit film into new rolls is not included in the process described here.
Switchable Chinese/English LCD Controls
The LCD control panel supports switching between Chinese and English for job setup and daily operation. Available settings include:
Cutting length and feed speed
Set cutting length and feed speed.
Batch quantity and total quantity
Set batch quantity and total quantity.
Cutting delay and cutting interval
Adjust cutting delay and cutting interval.
Batch pause and length compensation
Set batch pause and use length compensation for adjustments.
The control’s 0–80 speed scale is a setting range, not a direct speed reading in metres per minute.
Single-Wound and Centerfold POF Film Requirements
Please identify whether your polyolefin shrink film is supplied as a single-wound web or a centerfold roll. For single-wound POF film cutting, provide the web width and required sheet dimensions. For centerfold polyolefin shrink film cut-to-length requirements, specify the folded width, number of layers passing through the cutter and required finished form. Centerfold film feeding and cutting require a separate sample assessment. Cutting a folded web does not create a sealed shrink bag.
Film Grade and Cutting Quality
POF film thickness, grade, surface friction and winding condition can affect feeding and cutting results. State whether the film is cross-linked, coated or printed, and provide a representative sample. For printed POF shrink film cutting, distinguish fixed-length cutting from cutting in register with a printed design. The supplied catalogue does not confirm a print-mark sensor or automatic registration system.
Cutting Before Separate Sealing and Shrinking Operations
This machine prepares film pieces by roll feeding and cut-to-length cutting. Heat sealing, bag making and heat shrinking are separate processes and are not included in the configuration described here. If your application requires finished shrink bags or fully wrapped products, provide the complete process requirements so the necessary equipment can be assessed.
Tabletop Machine Configuration
The machine includes a switchable Chinese/English LCD control panel, polyurethane feeding rollers and an aluminium roll stand. A 120 W AC geared motor drives the cutting mechanism.
The power supply can be configured to customer requirements. Confirm the required voltage and frequency when requesting a quotation.
COMPONENT DETAILS
Component Details
01 Chinese / English Controls02 Cutting Blades03 Stepper Motor04 Polyurethane Feed Roller05 Cooling Fan
TECHNICAL DATA
Technical Specifications
These are catalogue reference specifications. The usable processing range, cutting tolerance and production rate depend on the POF film and configuration. The listed 0.1 mm lower width value is not a verified minimum slitting width.
POF Shrink Film Roll-to-Sheet Cutting Machine
Machine type
Tabletop POF film cutter
Catalogue-listed cutting width
0.1–300mm
Catalogue-listed cutting length
0.5–99,999.9 mm
Catalogue-listed cutting speed
34 m/min
Machine weight
60 kg
Machine dimensions
580 × 600 × 400 mm
Control panel
LCD display and keypad, 80 × 50 mm display
Interface languages
Switchable Chinese and English
Feed drive
Stepper motor
Cutting motor
120 W AC geared motor
Roller material
Polyurethane
Power supply
Configurable to customer requirements
Optional configuration
Longitudinal blades for slitting and cross-cutting
FAQ
Frequently Asked Questions
How does a POF shrink film cutting machine work?
The machine feeds polyolefin shrink film from a roll to a preset length, then cuts across its width to produce individual pieces. Operators adjust the cutting length, feed-speed setting and quantity through the control panel.
What is the maximum cutting width?
The maximum cutting width is 300mm. Provide your actual film width and roll dimensions to confirm the feeding arrangement.
Can I adjust the length of the POF film sheets?
Yes. The cutting length is adjustable. The catalogue lists a range of 0.5–99,999.9 mm, but the practical range and achievable tolerance must be confirmed for your film and setup.
Can the machine slit POF film and cut it to length?
Yes, with optional longitudinal blades and a suitable film setup. Provide the roll width, strip widths, number of strips and finished lengths to confirm blade spacing and configuration. Rewinding is not included.
Can it cut centerfold polyolefin shrink film?
Centerfold film requires a separate assessment. Provide the folded width, film thickness, number of layers and a sample. The feeding arrangement and cut quality must be verified before confirming suitability.
Does cutting centerfold film produce sealed shrink bags?
No. Cutting determines the piece length; it does not seal the open edges. Producing sealed bags requires an appropriate sealing process.
Can it process cross-linked POF shrink film?
Provide the film specification and a representative sample for evaluation. Suitability depends on the film’s feeding behaviour and the required edge quality and dimensional tolerance.
What film thickness can the machine handle?
The supplied catalogue does not state a supported POF film-thickness range. Please provide the actual thickness and a sample so the suitable configuration can be confirmed.
Can it cut printed POF film in register?
The listed configuration cuts to a programmed length. The catalogue does not confirm a print-mark sensor or automatic registration. If the cut must align with a printed design, provide the print repeat and required registration tolerance for assessment.
Does the control panel support Chinese and English?
Yes. The LCD control panel switches between Chinese and English for daily operation and settings such as cutting length, feed-speed level and quantity.
Does the machine heat-seal or shrink the film?
No. The configuration described here provides roll feeding and mechanical cutting, with optional longitudinal slitting. Heat sealing and heat shrinking require separate equipment.
How fast can it cut POF shrink film?
The catalogue lists a cutting speed of 34 m/min. Finished pieces per minute depend on the cutting length, film properties, timing settings and configuration. Confirm the required output through a trial using your actual film.
Request a Cutting Configuration for Your POF Shrink Film
To discuss a POF film roll-to-sheet cutting application, please provide:
POF film grade and thickness.
Any coating, adhesive layer or release liner.
Roll width, diameter and weight.
Required sheet lengths and dimensional tolerance.
Strip widths and number of strips, if slitting is needed.
Surface-quality and edge-finish requirements.
Target output and batch size.
Film samples, photos or finished-part drawings.
Supply voltage, frequency and delivery destination.
HESPER can review these details to discuss the configuration, a film cutting trial and a quotation.
Your requirements have been saved to the HESPER enquiry inbox. We will contact you at the email address you provided. There is no need to submit again.
Reference:
To add photos or drawings, use the email link below and keep the enquiry reference in the subject.