This tabletop CPP film cutting machine feeds cast polypropylene film from a roll and cross-cuts it into individual sheets at a preset length. Adjustable cutting length, feed-speed settings and quantity controls support repeat cutting jobs.
The LCD control panel switches between Chinese and English. Optional longitudinal blades combine CPP film slitting with cut-to-length cross-cutting. Provide your film specifications and finished-sheet requirements to confirm the feeding setup, blade configuration and suitability for your application.
Interface languages
Switchable Chinese / English
Longitudinal slitting
Optional
Send your CPP film thickness, roll width, required sheet dimensions and target output to confirm the configuration.
Prepare individual sheets from continuous CPP film rolls for your next production step. The feeding system advances the film, and the cutting mechanism cuts across its width at the programmed length.
For a cast polypropylene film roll-to-sheet cutting application, specify the film grade, thickness, roll dimensions and required sheet length. These details help determine the feeding setup and assess whether the configuration meets your production requirements.
02 / PROCESS
Adjustable CPP Film Cut-to-Length Processing
Operators can set the cutting length, feed-speed level and total quantity through the switchable Chinese/English LCD control panel. Cutting delay, cutting interval, batch pause and length compensation provide additional adjustments for repeat production tasks.
When selecting a CPP film cut-to-length machine, consider both the required sheet dimensions and how the film behaves during feeding. The practical cutting range and achievable tolerance should be confirmed using the actual film.
03 / PROCESS
Optional CPP Film Slitting and Cross-Cutting
Optional longitudinal blades allow the machine to combine CPP film slitting and cross-cutting. The longitudinal blades divide the film into narrower widths, while the cross-cutting mechanism cuts it to the set length.
Provide the incoming roll width, required strip widths, number of strips and finished lengths when requesting this option. Blade quantity, blade spacing and film suitability must be confirmed before ordering.
This configuration prepares cut pieces from a film roll. Rewinding slit film into new rolls is not included in the process described here.
Switchable Chinese/English LCD Controls
The LCD control panel supports switching between Chinese and English for job setup and daily operation. Available settings include:
Cutting length and feed speed
Set cutting length and feed speed.
Batch quantity and total quantity
Set batch quantity and total quantity.
Cutting delay and cutting interval
Adjust cutting delay and cutting interval.
Batch pause and length compensation
Set batch pause and use length compensation for adjustments.
The control’s 0–80 speed scale is a setting range, not a direct speed reading in metres per minute.
CPP Film Structure and Cutting Trials
Film thickness, surface treatment, winding condition and friction can affect feeding. For cast polypropylene film cut-to-length processing, provide the film specification, roll width and finished-sheet dimensions. A sample trial should confirm edge quality, roller marks and dimensional tolerance.
Clear CPP film, metallized CPP film and laminates containing a CPP layer require separate evaluation. A CPP layer alone does not establish the suitability of a multilayer laminate.
Tabletop Machine Configuration
The machine includes a switchable Chinese/English LCD control panel, polyurethane feeding rollers and an aluminium roll stand. A 120 W AC geared motor drives the cutting mechanism.
The power supply can be configured to customer requirements. Confirm the required voltage and frequency when requesting a quotation.
COMPONENT DETAILS
Component Details
01 Chinese / English Controls02 Cutting Blades03 Stepper Motor04 Polyurethane Feed Roller05 Cooling Fan
TECHNICAL DATA
Technical Specifications
These are catalogue reference specifications. The usable processing range, cutting tolerance and production rate depend on the CPP film and configuration. The listed 0.1 mm lower width value is not a verified minimum slitting width.
CPP Film Roll-to-Sheet Cutting Machine
Machine type
Tabletop CPP film cutter
Catalogue-listed cutting width
0.1–300mm
Catalogue-listed cutting length
0.5–99,999.9 mm
Catalogue-listed cutting speed
34 m/min
Machine weight
60 kg
Machine dimensions
580 × 600 × 400 mm
Control panel
LCD display and keypad, 80 × 50 mm display
Interface languages
Switchable Chinese and English
Feed drive
Stepper motor
Cutting motor
120 W AC geared motor
Roller material
Polyurethane
Power supply
Configurable to customer requirements
Optional configuration
Longitudinal blades for slitting and cross-cutting
FAQ
Frequently Asked Questions
How does a CPP film roll-to-sheet cutting machine work?
The machine feeds cast polypropylene film from a roll to a preset length, then cuts across its width to produce an individual sheet. Operators adjust the cutting length, feed-speed setting and quantity through the controls.
Can I adjust the length of the CPP film sheets?
Yes. The cutting length is adjustable. The catalogue lists a range of 0.5–99,999.9 mm, but the practical processing range and achievable tolerance must be confirmed for your film and setup.
Can the machine slit CPP film and cut it to length?
Yes, with optional longitudinal blades. These blades divide the film into narrower widths, and the cross-cutting mechanism cuts it to length. Provide the roll width, strip widths, number of strips and finished lengths to confirm the configuration.
Can the machine cut clear or metallized CPP film?
Provide an actual film sample for evaluation. Clear CPP film cut-to-length processing and metallized CPP film roll-to-sheet cutting require checks for feeding consistency, surface scratching, edge quality and the required dimensional tolerance.
Can it cut printed CPP film in register?
The listed configuration cuts to a programmed length. The catalogue does not specify a print-mark sensor or automatic registration. For printed CPP film cutting, provide the print repeat and registration tolerance so the required configuration can be confirmed.
Can it cut laminated film containing CPP?
Provide the full layer structure, total thickness and a sample for a cutting trial. Laminated film containing CPP must be assessed separately from single-layer CPP film.
What CPP film thickness can the machine handle?
The supplied catalogue does not state a supported film-thickness range. Suitability must be confirmed for your actual CPP film, feeding behaviour and required cut quality.
What is the maximum cutting width?
The catalogue lists a cutting-width range of 0.1–300mm. Confirm the usable film width for the selected configuration. The lower figure should not be treated as a verified minimum slitting width.
How fast can the machine cut CPP film?
The catalogue lists a cutting speed of 34 m/min. Finished sheets per minute depend on cutting length, film properties, timing settings and configuration. The control’s 0–80 speed scale does not directly indicate metres per minute.
How can I confirm cutting accuracy and surface quality?
Provide a representative film sample, finished-sheet dimensions and acceptable tolerance for a cutting trial. The trial should assess feeding consistency, dimensional results, roller marks and edge quality.
Does the machine rewind, heat-seal or make CPP bags?
Those processes are not included in the configuration described on this page. The listed functions are roll feeding and cut-to-length cross-cutting, with optional longitudinal slitting. State any additional process requirements when enquiring.
Does the control panel support Chinese and English?
Yes. The LCD control panel switches between Chinese and English for daily operation and settings such as cutting length, feed speed and quantity.
What information is needed for a quotation?
Send the CPP film grade, thickness, roll dimensions, required sheet lengths, tolerance and target output. Include strip widths and the number of strips if slitting is required, together with samples or photos, electrical requirements and the delivery destination.
Request a Cutting Configuration for Your CPP Film
To discuss a CPP film roll-to-sheet cutting application, please provide:
CPP film grade and thickness.
Any coating, adhesive layer or release liner.
Roll width, diameter and weight.
Required sheet lengths and dimensional tolerance.
Strip widths and number of strips, if slitting is needed.
Surface-quality and edge-finish requirements.
Target output and batch size.
Film samples, photos or finished-part drawings.
Supply voltage, frequency and delivery destination.
HESPER can review these details to discuss the configuration, a film cutting trial and a quotation.
Your requirements have been saved to the HESPER enquiry inbox. We will contact you at the email address you provided. There is no need to submit again.
Reference:
To add photos or drawings, use the email link below and keep the enquiry reference in the subject.