HESPER

Search this site

← Roll-to-sheet cutting

HESPER / TABLETOP FILM CUTTING

BOPP Film Roll-to-Sheet Cutting Machine — 300mm Cutting Width

Automatic Feeding · Adjustable Cutting Length · Chinese/English Controls · Optional Slitting

ROLL → SHEET

Set the length.
Feed and cut automatically.

This tabletop BOPP film cutting machine feeds biaxially oriented polypropylene film from a roll and cross-cuts it into individual sheets at a preset length. Adjustable cutting length, feed-speed settings and quantity controls support repeat cutting jobs.

The LCD control panel switches between Chinese and English. Optional longitudinal blades combine BOPP film slitting with cut-to-length cross-cutting. Provide your film specifications and finished-sheet requirements to confirm the feeding setup, blade configuration and suitability for your application.

Interface languages
Switchable Chinese / English
Longitudinal slitting
Optional

Send your BOPP film thickness, roll width, required sheet dimensions and target output to confirm the configuration.

PRODUCT VIDEO

Product video

Watch the English demonstration of this compact roll-to-sheet cutting machine.

BOPP Film Roll-to-Sheet Cutting Machine videoWatch Demo on YouTube Opens in a new tab
Machine with roll stand

01 / PROCESS

Biaxially Oriented Polypropylene Film Roll-to-Sheet Cutting

Prepare individual sheets from continuous BOPP film rolls for your next production step. The feeding system advances the film, and the cutting mechanism cuts across its width at the programmed length.

For a biaxially oriented polypropylene film roll-to-sheet cutting application, specify the film grade, thickness, roll dimensions and required sheet length. These details help determine the feeding setup and assess whether the configuration meets your production requirements.

Chinese / English control panel

02 / PROCESS

Adjustable BOPP Film Cut-to-Length Processing

Operators can set the cutting length, feed-speed level and total quantity through the switchable Chinese/English LCD control panel. Cutting delay, cutting interval, batch pause and length compensation provide additional adjustments for repeat production tasks.

When selecting a BOPP film cut-to-length machine, consider both the required sheet dimensions and how the film behaves during feeding. The practical cutting range and achievable tolerance should be confirmed using the actual film.

Front detail of the cutting assembly

03 / PROCESS

Optional BOPP Film Slitting and Cross-Cutting

Optional longitudinal blades allow the machine to combine BOPP film slitting and cross-cutting. The longitudinal blades divide the film into narrower widths, while the cross-cutting mechanism cuts it to the set length.

Provide the incoming roll width, required strip widths, number of strips and finished lengths when requesting this option. Blade quantity, blade spacing and film suitability must be confirmed before ordering.

This configuration prepares cut pieces from a film roll. Rewinding slit film into new rolls is not included in the process described here.

Switchable Chinese/English LCD Controls

The LCD control panel supports switching between Chinese and English for job setup and daily operation. Available settings include:

Cutting length and feed speed

Set cutting length and feed speed.

Batch quantity and total quantity

Set batch quantity and total quantity.

Cutting delay and cutting interval

Adjust cutting delay and cutting interval.

Batch pause and length compensation

Set batch pause and use length compensation for adjustments.

The control’s 0–80 speed scale is a setting range, not a direct speed reading in metres per minute.

BOPP Film Structure and Cutting Trials

Film thickness, surface treatment, winding condition and friction can affect feeding. For biaxially oriented polypropylene film cut-to-length processing, provide the film specification, roll width and finished-sheet dimensions. A sample trial should confirm edge quality, roller marks and dimensional tolerance.

Clear BOPP film, metallized BOPP film and laminates containing a BOPP layer require separate evaluation. A BOPP layer alone does not establish the suitability of a multilayer laminate.

Tabletop Machine Configuration

The machine includes a switchable Chinese/English LCD control panel, polyurethane feeding rollers and an aluminium roll stand. A 120 W AC geared motor drives the cutting mechanism.

The power supply can be configured to customer requirements. Confirm the required voltage and frequency when requesting a quotation.

COMPONENT DETAILS

Component Details

Chinese / English Controls
01 Chinese / English Controls
Cutting Blades
02 Cutting Blades
Stepper Motor
03 Stepper Motor
Polyurethane Feed Roller
04 Polyurethane Feed Roller
Cooling Fan
05 Cooling Fan

TECHNICAL DATA

Technical Specifications

These are catalogue reference specifications. The usable processing range, cutting tolerance and production rate depend on the BOPP film and configuration. The listed 0.1 mm lower width value is not a verified minimum slitting width.

BOPP Film Roll-to-Sheet Cutting Machine
Machine typeTabletop BOPP film cutter
Catalogue-listed cutting width0.1–300mm
Catalogue-listed cutting length0.5–99,999.9 mm
Catalogue-listed cutting speed34 m/min
Machine weight60 kg
Machine dimensions580 × 600 × 400 mm
Control panelLCD display and keypad, 80 × 50 mm display
Interface languagesSwitchable Chinese and English
Feed driveStepper motor
Cutting motor120 W AC geared motor
Roller materialPolyurethane
Power supplyConfigurable to customer requirements
Optional configurationLongitudinal blades for slitting and cross-cutting

FAQ

Frequently Asked Questions

How does a BOPP film roll-to-sheet cutting machine work?

The machine feeds biaxially oriented polypropylene film from a roll to a preset length, then cuts across its width to produce an individual sheet. Operators adjust the cutting length, feed-speed setting and quantity through the controls.

Can I adjust the length of the BOPP film sheets?

Yes. The cutting length is adjustable. The catalogue lists a range of 0.5–99,999.9 mm, but the practical processing range and achievable tolerance must be confirmed for your film and setup.

Can the machine slit BOPP film and cut it to length?

Yes, with optional longitudinal blades. These blades divide the film into narrower widths, and the cross-cutting mechanism cuts it to length. Provide the roll width, strip widths, number of strips and finished lengths to confirm the configuration.

Can the machine cut clear or metallized BOPP film?

Provide an actual film sample for evaluation. Clear BOPP film cut-to-length processing and metallized BOPP film roll-to-sheet cutting require checks for feeding consistency, surface scratching, edge quality and the required dimensional tolerance.

Can it cut printed BOPP film in register?

The listed configuration cuts to a programmed length. The catalogue does not specify a print-mark sensor or automatic registration. For printed BOPP film cutting, provide the print repeat and registration tolerance so the required configuration can be confirmed.

Can it cut laminated film containing BOPP?

Provide the full layer structure, total thickness and a sample for a cutting trial. Laminated film containing BOPP must be assessed separately from single-layer BOPP film.

What BOPP film thickness can the machine handle?

The supplied catalogue does not state a supported film-thickness range. Suitability must be confirmed for your actual BOPP film, feeding behaviour and required cut quality.

What is the maximum cutting width?

The catalogue lists a cutting-width range of 0.1–300mm. Confirm the usable film width for the selected configuration. The lower figure should not be treated as a verified minimum slitting width.

How fast can the machine cut BOPP film?

The catalogue lists a cutting speed of 34 m/min. Finished sheets per minute depend on cutting length, film properties, timing settings and configuration. The control’s 0–80 speed scale does not directly indicate metres per minute.

How can I confirm cutting accuracy and surface quality?

Provide a representative film sample, finished-sheet dimensions and acceptable tolerance for a cutting trial. The trial should assess feeding consistency, dimensional results, roller marks and edge quality.

Does the machine rewind, heat-seal or make BOPP bags?

Those processes are not included in the configuration described on this page. The listed functions are roll feeding and cut-to-length cross-cutting, with optional longitudinal slitting. State any additional process requirements when enquiring.

Does the control panel support Chinese and English?

Yes. The LCD control panel switches between Chinese and English for daily operation and settings such as cutting length, feed speed and quantity.

What information is needed for a quotation?

Send the BOPP film grade, thickness, roll dimensions, required sheet lengths, tolerance and target output. Include strip widths and the number of strips if slitting is required, together with samples or photos, electrical requirements and the delivery destination.

Request a Cutting Configuration for Your BOPP Film

To discuss a BOPP film roll-to-sheet cutting application, please provide:

HESPER can review these details to discuss the configuration, a film cutting trial and a quotation.

Discuss Your BOPP Film Cutting Requirements ↗

MATERIAL CHECK & ENQUIRY

Confirm the material.
Then the configuration.

Thickness range, minimum dimensions and working rate depend on the material.

01

Roll specification

Include material, thickness, stretch, web width, roll diameter and roll weight.

02

Slitting & cross-cutting

Specify minimum slit width, number of strips, cross-cut length and required tolerance.

03

Output & sample

Provide material photos, finished-part requirements and target output to confirm suitability and discuss a cutting trial.

Selection & delivery enquiries

Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.

Send material requirements ↗

Ask about this machine

Share material photos, thickness, width and cut length. We can help you choose a machine; unknown details can be added later.

Your contact details & requirements

Only the three fields marked * are required.

Share material photos, thickness, width and cut length to help us recommend a machine. Unknown details can be added later.

HESPER stores your contact details and requirements to reply to this enquiry.

Add material photos (optional)
Material photos (optional)

Up to 3 photos. Take a photo or choose from your library; photos are optional. Images are resized to JPG, up to 5 MB each.

    Add technical details (optional)
    Get a Quote / Add Photos ↗