GENERAL-PURPOSE
100mm
Maximum cutting width
- Cut length
- 0.5–99999.9mm
- Cutting motor
- 60W
- Machine weight
- 30kg
Optional longitudinal blades for slitting + cross-cutting
View full specifications ↗
HESPER / BENCHTOP CUTTING
100mm & 200mm General-Purpose Cutters · 110mm Metal-Material Version
Automatic feeding. Individual pieces at your preset length.
ROLL / STRIP → LENGTHFEED / CUT / REPEAT
Feed compatible rolls, strips or tubing and cross-cut them into preset lengths for the next production step. A compact benchtop format brings automatic material preparation to your workbench.
The 100mm and 200mm versions offer cutting delay, interval, batch pause, length compensation and total-count settings, with optional longitudinal slitting. Evaluate the dedicated 110mm version for thin metal strips and foil.
Standard blades handle compatible materials up to 10mm thick. Thicker material requires custom blades. Workable thickness depends on material and configuration.
HESPER / MACHINE HIGHLIGHTS
Watch blue strip material, green material and white roll material feed and cut in this three-machine highlights video.
Watch on YouTube ↗CHOOSE YOUR CONFIGURATION
Start with the material and width, then compare the blade, drive and cut-length range.
GENERAL-PURPOSE
Maximum cutting width
Optional longitudinal blades for slitting + cross-cutting
View full specifications ↗GENERAL-PURPOSE
Maximum cutting width
Optional longitudinal blades for slitting + cross-cutting
View full specifications ↗METAL-MATERIAL
Effective width
SKDHSS blade · Chinese/English panel
View full specifications ↗MATERIALS × PROCESSES
Roll-to-sheet cross-cutting, strip cut-to-length processing and compatible tubing cutting. Thickness, hardness and surface properties guide the configuration.
Cut compatible webbing, fabric strips, nonwoven rolls, zipper tape, hook-and-loop tape and cord to preset lengths. A webbing cut-to-length application produces individual lengths for subsequent assembly. Narrow nonwoven rolls can be cross-cut into separate pieces within the selected machine width. Polyester, nylon, felt and microfiber grades can be assessed using thickness, weight and edge requirements.
PET film, PVC film, graphene film, battery film, bubble film and other compatible flexible plastics can be evaluated for automatic cut-to-length processing. For a narrow film roll-to-sheet application, specify film thickness, surface condition and finished sheet length. PE, PP, OPP, CPP, BOPP, POF, TPU, EVA and PVA film grades can be submitted for application assessment.
EVA foam, EPE foam, sponge and compatible insulation materials can be evaluated for strip cut-to-length or roll cross-cutting. Foam density, compression and thickness affect feeding and cutting. PE foam and IXPE foam samples may also be submitted for assessment. For bubble wrap roll-to-sheet cutting, provide the bubble height and overall thickness.
Prepare preset lengths of compatible paper, card, packaging and electrical insulation materials. Kraft paper, release paper, coated paper, fish paper and mica-based sheets require a feeding and blade setup suited to their structure. A narrow paper roll can be cross-cut into sheets; pre-cut strips can be cut into shorter lengths.
Evaluate heat-shrink tubing, PVC tubing, rubber, latex, silicone, nylon, foam and pneumatic tubing, plus PTFE tubing, fiberglass sleeving, waxed insulating sleeving and copper braided sleeving. For tubing cut-to-length processing, provide the outside diameter, wall thickness, hardness and required cut length.
Cut compatible leather strips, synthetic leather, rubber, silicone and sealing strips into preset lengths. Describe the finished piece, material thickness and required edge quality when requesting a leather strip or rubber seal cut-to-length setup.
Double-sided tape and selected flexible composites can be evaluated for through-cutting to length. Protective film, release liners, metallized film and foil laminates are application candidates. Tell us whether adhesive is exposed or protected by a release liner so the feed path and blade can be assessed.
The dedicated 110mm metal-material cutter is the option to evaluate for copper strip, nickel strip, nickel sheet, aluminum foil and aluminum strip cut-to-length work. Its listed cutting motor is 250W and its blade designation is SKDHSS. Metal grade, hardness, width and thickness must be checked for the individual job.
THE CUTTING PROCESS
Optional longitudinal blades on the 100mm and 200mm versions divide a compatible web into narrower strips before cross-cutting.
Load a compatible roll or strip and align it along the feed path.
Enter the cut length and available quantity settings. Arrange optional slitting blades if needed.
Check feeding, finished length and cut edges using the actual material.
Run the batch to produce individual sheets or pieces at the preset length.
SPECIFICATIONS & EQUIPMENT
Compare the two general-purpose cutters and the dedicated metal-material version side by side.
| Parameter | 100mm general-purpose | 200mm general-purpose | 110mm metal-material |
|---|---|---|---|
| Processing focus | General-purpose cut-to-length | General-purpose cut-to-length | Thin-metal cut-to-length |
| Blade width / effective width | Blade width: 0.1–100mm | Blade width: 0.1–200mm | Effective width: 110mm |
| Listed cutting speed | 34m/min | 34m/min | 34m/min |
| Cut-length setting | 0.5–99999.9mm | 0.5–99999.9mm | 0.2–9999.9mm |
| Machine weight | 30kg | 42kg | 35kg |
| Machine dimensions | 400 × 380 × 400mm | 400 × 460 × 400mm | 400 × 460 × 400mm |
| Power supply | Configured to customer requirements | Configured to customer requirements | Configured to customer requirements |
| Parameter | 100mm general-purpose | 200mm general-purpose | 110mm metal-material |
|---|---|---|---|
| Blade designation | SKD-11 | SKD-11 | Imported SKDHSS |
| Panel material | Stainless steel | Stainless steel | Stainless steel |
| Display | 80 × 50 LCD | 80 × 50 LCD | 80 × 50 LCD |
| Feed motor | 86 × 96 stepper motor | 86 × 96 stepper motor | 86 × 96 stepper motor |
| Bearings | Imported SOO6Z | Imported SOO6Z | Imported SOO6Z |
| Feed roller | Polyurethane | Polyurethane | Polyurethane |
| Cutting motor | 60W | 60W AC geared motor | 250W AC geared motor |
| Interface language | Specify required language | Specify required language | Chinese / English |
| Cross-cutting blade | SKD-11 blade | SKD-11 blade | Reusable, wear-resistant blade |
| Parameter | 100mm general-purpose | 200mm general-purpose | 110mm metal-material |
|---|---|---|---|
| Start / stop | Included | Included | |
| Cutting delay / interval | Adjustable | Adjustable | |
| Batch pause / length compensation | Included | Included | |
| Total-count setting | 1–999999 | 1–999999 | |
| Speed-level setting | 0–80 (not m/min) | 0–80 (not m/min) | |
| Longitudinal slitting | Optional blades for slitting + cross-cutting | Optional blades for slitting + cross-cutting |
| Parameter | 100mm general-purpose | 200mm general-purpose | 110mm metal-material |
|---|---|---|---|
| Power cable | 1 | 1 | |
| Wrenches | No. 3, 4, 5 and 6: one each | No. 3, 4, 5 and 6: one each | |
| Spare fuse | 1 | 1 | |
| Instruction manual | 1 | 1 | |
| Roll holder | 1 standard L-shaped roll holder | 1 standard L-shaped roll holder | |
| Export wooden crate | 540 × 440 × 450mm | 540 × 500 × 450mm | 540 × 500 × 555mm |
| Packed weight | 45kg | 56kg | 51kg |
34m/min is the listed linear speed; output depends on cut length, material and setup. The 0–80 setting is a speed level. The 0.1mm in the blade-width listing is not a finished-part tolerance or minimum slit width.
Standard blades are intended for compatible materials up to 10mm thick. Over 10mm requires custom blades. Evaluate thin metals by grade, hardness and thickness; provide both outside diameter and wall thickness for tubing.
BEFORE YOU ORDER
Materials, processing and machine selection.
Discuss your application ↗Choose the 100mm or 200mm general-purpose version around the width and feeding characteristics of your compatible material. Consider the dedicated 110mm metal-material version for thin metal strips and foil. The three versions have different dimensions, weights, motors and listed cut-length ranges.
Yes. It feeds compatible material to the selected length and cross-cuts it. This supports roll-to-sheet processing for narrow flexible webs and cut-to-length processing for strips or tubing, subject to the selected configuration.
Optional longitudinal blades are available for the 100mm and 200mm general-purpose versions. Specify the strip widths, number of lanes and material so the blade arrangement can be selected. Discuss slitting requirements for the 110mm metal-material version separately.
Standard blades are intended for compatible materials up to 10mm thick. Material over 10mm requires custom blades and a review of feeding clearance and cutting suitability. The workable thickness depends on the material; the 10mm limit is not a universal metal-cutting capacity.
Webbing, fabric, nonwovens and foam are application categories for assessment. Provide material composition, thickness or density, width and finished length to select a suitable cut-to-length setup.
Provide the tubing material, outside diameter, wall thickness, hardness and required cut length. Tube outside diameter and wall thickness are different measurements and both affect machine selection.
Copper strip, nickel strip and sheet, aluminum foil and aluminum strip are listed material categories. Send the exact metal grade, temper or hardness, width and thickness so the blade and feeding arrangement can be evaluated.
The 110mm metal-material version includes a Chinese/English operating panel. The 100mm and 200mm versions have an LCD and keypad; specify your required interface language when selecting a machine.
The power supply can be customized to customer requirements. Include your required voltage and frequency in the enquiry.
Send the material and its structure, width and thickness, roll diameter and weight, required piece length, expected output, any adhesive or coating, and the required power supply. For optional slitting, add the strip widths and number of strips. For tubing, add outside diameter and wall thickness.
START WITH YOUR MATERIAL
Share your material and finished-part requirements for a machine recommendation and quotation.
Share material photos, thickness, width and cut length. We can help you choose a machine; unknown details can be added later.
Trouble submitting? Use the basic form (no JavaScript needed)
HESPER / RECEIVED
Your requirements have been saved to the HESPER enquiry inbox. We will contact you at the email address you provided. There is no need to submit again.
Reference:
To add photos or drawings, use the email link below and keep the enquiry reference in the subject.
Email Photos or Drawings ↗This is an email draft, not a sent email. Review it and send it from your mail application.
If your email app does not open, copy the draft and send it to: sales@hespermachine.com