01
Ultrasonic generator
Supplies ultrasonic energy for cutting and punching, working with the fitted tooling to process the material.
← Tape & webbing cutting
HESPER / ULTRASONIC CUTTING & PUNCHING
CXY-80T Ultrasonic Cutting & Punching Machine
CXY-80T · Twin-head ultrasonic processing · PLC touchscreen
Main machine view: twin processing heads, control panel and reel holder
Open image to enlarge ↗CXY-80T / CUT & PUNCH
Set the length and hole spacing.
Cut and punch your strips.
Fully automatic ultrasonic cut-to-length processing and hole punching for webbing, ribbon and belting. Set the cut length and batch quantity, and use the PLC touchscreen to program hole count and spacing. Angle and V-cut options are configured to suit the material and required tooling.
- Model
- CXY-80T
- Power supply
- 220 V / 50 Hz
- Power
- 2.0 kW
Provide a material sample, finished length, end profile and hole-position drawing to confirm suitability and tooling.
Or email us directly: Liangchengfeng124@gmail.com
01 / MACHINE FEATURES
Ultrasonic power, controls and tooling.
02
PLC touchscreen
Set the hole count and spacing on the touchscreen for repeated punching and cutting jobs with different finished-part requirements.
03
Cutting and punching tools
Cutting and punching tools are designed to produce clean, smooth edges. Results depend on the material and tooling setup.
02 / SPECIFICATIONS
CXY-80T specifications
Confirm the configuration for your material and finished part, and allow installation space for the machine.
| Model | CXY-80T |
|---|---|
| Process | Ultrasonic cutting and punching |
| Head configuration | Twin-head |
| Power supply | 220 V / 50 Hz |
| Power | 2.0 kW |
| Weight | 172 kg |
| Overall dimensions | 980 × 650 × 1250 mm |
| Operator interface | PLC touchscreen |
| Programmable settings | Cut length, batch quantity, hole count and hole spacing |
| Cut options | Angle cuts and V-notches |
03 / CUT & PUNCH OPTIONS
Match the end profile and hole pattern.
These diagrams illustrate cut profiles and punching. Confirm angle cuts, V-notches and hole patterns for your material, drawing and selected tooling.
04 / MATERIAL EXAMPLES
Processing webbing, ribbon and belting.
The supplied product information lists the following material examples. Ultrasonic suitability depends on material composition, dimensions and tooling. Confirm with an actual sample.
Confirm the setup for your finished part.
Share a material sample, finished dimensions, hole-position drawing and target output.
MATERIAL CHECK & ENQUIRY
Confirm the material.
Then the configuration.
Thickness range, minimum dimensions and working rate depend on the material.
Material & dimensions
Provide material composition, width or diameter, thickness, stretch and an actual sample.
Cut profile & hole pattern
Specify finished length, end profile, hole diameter, hole count, spacing, hole-position drawing and required tolerance.
Output & site conditions
Include target output, batch size, site power and compressed-air conditions to confirm the processing setup with your sample.
Selection & delivery enquiries
Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.
Liangchengfeng124@gmail.com