PLC touchscreen controls
Set feed length, operating speed and quantity, with automatic feeding and counting.
← Tape cutting
HESPER / ULTRASONIC RIBBON CUTTING
Automatic Ribbon Ultrasonic Cutting Machine for V-Cuts and Angled Cuts
PLC touchscreen · Photoelectric registration · Ultrasonic cutting
Overall angled view
Open image to enlarge ↗RIBBON / V-CUTS / ANGLED CUTS
Feed to length.
Cut the required profile.
Automatic ultrasonic cut-to-length processing for ribbon, webbing and tape, with V-cuts and angled cuts. PLC touchscreen controls set feed length and speed, while photoelectric registration supports marked materials. Cut profiles require matching tooling; confirm edge sealing and material suitability with a sample.
- Controls
- PLC touchscreen
- Cutting action
- Ultrasonic
- Power supply
- 220 V / 50 Hz
Share a material sample, width, cut length and cut-profile drawing to confirm the configuration.
Or email us directly: Liangchengfeng124@gmail.com
PRODUCT VIDEO
Ultrasonic ribbon cutting demonstration
Watch the English demonstration video for this machine. Confirm the required configuration with a material sample and cut-profile drawing.
English video · Approx. 10 sec01 / MACHINE FEATURES
Automatic feeding and ultrasonic profile cutting.
Photoelectric registration
Registration marks help position printed tape for cutting. Confirm mark contrast and sensor suitability with a sample.
Automatic feeding and guidance
Feed rollers and adjustable guides advance the tape along the set material path.
Rotary ultrasonic cutting head
The ultrasonic cutting unit works with the feed controls. Cut finish depends on material and operating settings.
V-cuts and angled cuts
Configure tooling for the required cut profile. Include angles, V-notch dimensions and a finished-part drawing in your enquiry.
Ultrasonic generator
An ultrasonic generator supplies energy for the cutting process.
02 / CONFIGURATION
Machine configuration
Confirm the listed output for the material, cut length, tooling and operating settings. Custom profiles require drawing review and a sample cutting trial.
| Effective width | 100 mm |
|---|---|
| Controls | PLC touchscreen |
| Registration | Photoelectric registration |
| Feed settings | Adjustable length and speed |
| Supplier-listed output | 150–200 pieces/min, depending on material, length and cut profile |
| Power supply | 220 V / 50 Hz |
| Machine dimensions | 1000 × 600 × 1350 mm |
| Machine weight | 120 kg |
| Air supply | External compressed-air supply required |
03 / MATERIALS
For ribbon, webbing and tape.
Ultrasonic cutting and edge sealing depend on material composition and thickness. Provide an actual sample to confirm suitability, cut profile and sealing requirements.
RibbonNylon webbingElastic tapeHook-and-loop tapeZipper tapePrinted ribbon and label tape
Prepare an enquiry for this machine.
Include a material sample, width, cut length, cut-profile drawing and target output.
MATERIAL CHECK & ENQUIRY
Confirm the material.
Then the configuration.
Thickness range, minimum dimensions and working rate depend on the material.
Material & roll specification
Provide material composition, width, thickness, stretch, roll diameter and an actual sample.
Length & cut-profile drawing
Include cut length, required tolerance, angled-cut geometry, V-notch dimensions and a finished-part drawing.
Output & cutting trial
Specify target output and site power and air conditions. Confirm tooling, edge sealing and configuration through a sample trial.
Selection & delivery enquiries
Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.
Liangchengfeng124@gmail.com